Infusion Pump |#CI-1000A
●Product Name: Infusion pump CI-1000A
●Infusion pump CI-1000A is with a full function of audio and visual alarm and exact infusion-controlled
function. It is used widely, safely and reliably.
●Infusion Pump CI-1000A can control the flow rate automatically. It is not just available for the intravenous
infusion of normal brine and dextrose, but also for the infusion of high surface tension.
●Standard IV set.
●The battery supply system can guarantee the continue infusion when move the patient or the AC power is
●The finger pump is detachable and can be washed in water.
●The tube clamp is detachable and can be washed in water.
●Easily operate with single hand by using the side handle.
●Product name: Infusion pump CI-1000A
●Applicable IV set:: Stand IV set with outer diameter 3.4 ~ 4.5 mm
●Pumping mechanism: Peristaltic finger pump
●Infusion mode: Volumetric
●Maximum flow rate: 999.9 mL/h
●Flow rate accuracy: ±5% (after calibration)
●Volume infused display: 0 ~ 9999 mL
●Volume limit: 1 ~ 9999 mL
●KVO (keep vein open): 1 mL/h
●Air-in-line detection: Ultrasonic with 8 sensitivities setting
●Occlusion pressure: 40 ~ 140 KPa, 8 sensitivities setting
●Sound volume: 8 levels setting
●Max. power consumption: ≤25VA
●Peristaltic finger pump: Detachable
●Tube clamp: Detachable
●Display: Color LCD with high brightness
●AC power: AC100V ~ 240V, 50Hz/60Hz
●Internal battery: Rechargeable Ni-MH battery, DC12V,2000mAh, life: approximately 4 hours at 25mL/h
●Net weight: 2.3 kg
●Dimensions: 150mm x 150mm x 235mm
●Audio and visual alarms: Air-in-line, Door open, Occlusion, Infusion finished, No operation, Battery low,
Pump error, Motor reverse, Pressure abnormity, Sound abnormity, AC power lost.
●Temperature: +5°C ~ +40°C
●Relative Humidity: 20% ~ 90%
●Atmospheric Pressure: 70KPa ~ 106KPa